This cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use, as it is tremendously convenient in its size. Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled cuts of -2° to 47°
Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°.
Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe.
Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured.
Convenient: Four saw blade positions can be saved and selected via the digital display.
Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision
Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results
Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance
Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free
Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display
Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor
Healthy working with a system: Ideal also in combination with the Festool cordless extractors
Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment
Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one
Unique: Three-year warranty for battery packs and chargers too
The unique digital operation produces results with maximum precision, down to accuracies within a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines. Together with the UG-CSC-SYS underframe, you have the perfect worktable immediately on hand, and transport from the vehicle to the point of use thus succeeds effortless. The CSC SYS 50: Precise sawing to go.
Festool 577371 Technical data:
Battery voltage (rated voltage): 2 x 18 V (Batteries not included)
Idle engine speed: 4 500 – 6 800 min⁻¹
Saw blade location hole: 20 mm
Inclination angle: -10 - +47 °
Cutting height 0°: 0 - 48 mm
Cutting height 45°: 0 - 34 mm
Cutting height -10°: 21 - 32 mm
Mitre angle: 0 - 70 °
Parallel cut width: 280 mm
Tabletop height: 228 mm
Dimensions (L x W x H): 512 x 396 x 296 mm
Dust extraction connection diameter: 27 mm
Drive type: Battery
Product weight without accessories: 15 kg
Sawing: Standards series EN: 62841
Sawing: Uncertainty (noise) K: 3 dB
Sawing: A-weighted sound power level, LWA: 98 dB(A)
Sawing: A-weighted sound pressure level, LpA: 85 dB(A)
Items included
UG-CSC-SYS underframe
WOOD FINE CUT HW 168 x 1.8 x 20 WD42 circular saw blade
Chip collection bag
Hex key, WAF 6
Parallel side fence
Preset profile setting rail
Splitting wedge for concealed cuts
Splitting wedge with protective hood
Workpiece holder
Angled cuts from -2° to 47° (-10° possible in the event of a restricted cutting depth of 21–32 mm) thanks to tilting saw blade
Cross-cuts up to 450 mm wide, quick and precise with the integrated slide
Exact height and angle adjustment by means of electric stepper motors. Can be set precisely to 0.1 mm and controllable via a display
Rip cutting up to a cutting height of 48 mm and a width of 280 mm with a secure support on the integrated fold-out table
Transport practically in the handy Systainer format
